1 .00 x 0.30 [ .040x.012 ] 0.50 [ .020 ] 3.50 [ .138 ] 12 .50 [ .492 ] 14 . 1 0 [ .555 ] 1 .80 [ .071 ] 7 .30 [ .287 ] 4 .00 [ .157 ] 5.00 [ .197 ] 3.30 [ .130 ] sq . 1 .80 [ .071 ] how to order series tl switches 80 specifications subject to change without notice. tact switches phone: 763-504-3525 fax: 763-531-8235 www.e - switch.com info@e - switch.com specifications rating: 50ma@50 vdc electrical life: 100,000 cycles contact resistance: 100m ? max., typical @ 2-4 vdc 100ma for both silver and gold plated contacts insulation resistance: 1,000m ? min. dielectric strength: >1,000 v rms at sea level operating force: 160 50 gf, 260 50 gf materials housing: polybutylene terephthalate (pbt) actuator: polybutylene terephthalate (pbt) cover: polyester contacts: silver plated phosphor bronze terminals: silver plated copper alloy model no. series actuator ("l" dimension) operating force contact material cap color cap (where avail.) / / tl tl 1100 (none)=3.3mm a=3.8mm b=4.554mm c=6.45mm rt. angle d=4.3mm e=7.5mm f=12mm g=11.2mm rt. angle f160 f260 see cap options q=silver r=gold tl 1100 tl 1100 c f260 q tak gry example p.c. mounting = square snap-on actuator head l dimension is 7.3mm 10o( n0(.1= 45c0 1)0.( n0e )= .0(( n01 a= pp 080-089 tact.qxd 5/7/02 10:47 am page 80
tl 1100 b series tl switches 81 specifications subject to change without notice. tact switches phone: 763-504-3525 fax: 763-531-8235 www.e - switch.com info@e - switch.com 1.7 b = 4.55 mm d = 4.3 mm actuator length (l) in mm 1.7 tl 1100 a tl 1100 c tl 1100 d tl 1100 e p.c. mounting p.c. mounting p.c. mounting p.c. mounting 1.30 [.051] typ. 12.50 [.492] 5.00 [.197] cl 5.00 [.197] 2.4 [.094] typ. 9.00 [.354] (2 pl) 1.30 [.051] 2.75 [.108] 1.30 [.051] typ. 1.30 [.051] typ. 12.50 [.492] 5.00 [.197] 1.30 [.051] typ. 12.50 [.492] 5.00 [.197] pp 080-089 tact.qxd 5/7/02 10:47 am page 81
series tl switches 82 tact switches phone: 763-504-3525 fax: 763-531-8235 www.e - switch.com info@e - switch.com 1.7 specifications subject to change without notice. tl1100 f tl1100 g p.c. mounting p.c. mounting 1.30 [.051] typ. 12.50 [.492] 5.00 [.197] cl 5.00 [.197] 2.4 [.094] typ. 9.00 [.354] (2 pl) 1.30 [.051] 2.75 [.108] 1.30 [.051] typ. pp 080-089 tact.qxd 5/7/02 10:47 am page 82
|